Phytec Linux-Kit phyCARD-M, Быстрый старт

Страница: 90 / 110

phyCARD-M Quick Start Instructions
4.3 Setting a Breakpoint
Now you will set a breakpoint in your program. The breakpoint will be set
on the last line of the function
main() . If you resume the application, the
debugger will stop on this line.
•
Select the last line in main() .
•
Right-click into the small grey border on the left-hand side and select
Toggle Breakpoint to set a new breakpoint.
86
© 2010 PHYTEC Messtechnik GmbH L-746e_1