Phytec Linux-Kit phyCARD-M Скачать руководство пользователя страница 7

Страница: 7 / 110

phyCARD-M Introduction

1.4

Conventions Used in this Quick Start Manual

The following is a list of the typographical conventions used in this Quick
Start manual:

Italic

Used for file and directory names, program and command
names, command-line options, menu items, URLs, and other
terms that correspond the terms on your desktop.

Bold

Used in examples to show commands or other text that should
be typed literally by the user.

Pay attention to notes set apart from the text with the following icons:

At this part you might leave the path of this Quick Start.

This is a warning. It helps you to avoid annoying problems.

Provides useful supplementary information about the topic.

At the beginning of each chapter you can find information of
the time needed to pass that chapter.

You have successfully passed an important part of this Quick
Start manual.

Provides information to solve common problems.

Содержание Linux-Kit phyCARD-M















































































































Результаты поиска

Содержание Linux-Kit phyCARD-M

Отзывы:

Бренды по названию

Популярные бренды

Phytec Linux-Kit phyCARD-M, Быстрый старт

Результаты поиска

Содержание Linux-Kit phyCARD-M

Отзывы:

Бренды по названию

Популярные бренды