Phytec Linux-Kit phyCARD-M, Быстрый старт

Страница: 97 / 110

phyCARD-M Debugging an Example Project
You can see the contents of the variable buffer at the address 0xbee13ca7
(or whatever address is used on your system).
•
Now click the Resume button from the menu bar.
The debugger stops at the breakpoint in the last line of main().
•
Click the Resume button to end the application.
You have successfully passed the debugging chapter. You are
now able to configure and use Eclipse for remote debugging.
You can step through a project, watch and change the content
of variables, and you can use the memory monitor to view the
content at a memory address.
© 2010 PHYTEC Messtechnik GmbH L-746e_1
93