Phoenix LT4, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 69 / 168

Maintenance and Adjustments
61-900040-000 Rev. Date:
01/22
4-15
Tools Needed:

Oil can with nozzle dispenser or small, long-
handled, stiff-bristled brush

5/32-inch hex wrench
1. Unlatch the oil compartment door
latches, disconnect the vacuum hose
and remove the waste tank, remove
the cap from the cleaner tank, remove
the two screws from each side of the
hood (see Figure 4- 13), and lift the
hood from the frame. Set the screws
aside.
2. Locate the drive chain along the left side of the drive shaft and the oil transfer roller
chain at the left rear of the machine, as shown in Figure 4- 14
.
3. Apply a small amount of oil to the chain links.
4. Manually move the chains and apply oil until all the links have been lubricated.
5. Wipe off any excess oil.
6. Reinstall the hood, cleaner tank cap, waste tank, and vacuum hose.
Figure 4- 14
Always ensure the Phoenix LT4 Lane Machine is
disconnected from any power source before starting
any maintenance, replacement, or repair task.
Figure 4- 13