Phoenix LT4, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 10 / 168

Phoenix LT4 Lane Machine Operation, Maintenance, and Parts Manual
1-4 Rev. Date:
01/22
61-900040-000
IMPORTANT SAFETY INFORMATION, cont.

DO NOT use flammable or toxic materials in the lane machine. Use only
cleaners and conditioners specifically formulated for use by the bowling
industry.

Avoid splashing liquid when filling the cleaner tank and oil tanks. Follow all
instructions and precautions on the product label. In case of eye contact,
remove any contact lenses and flush with water for 15 minutes.

DO NOT fill the oil tanks on or near the approach. Conditioner spilled on
the approach presents a hazard to the bowler.

DO NOT store machine upright with a full tank of cleaner. Cleaner may leak
out of the tank's air vent hole.

Turn off the machine if foam or liquid exits from the vacuum exhaust.

Be aware of the possibility of the machine continuing onto the approach
when it returns to the foul line. Stay out of the path of machine travel when
the machine is approaching the foul line.

DO NOT wear loose personal items such as neckties, necklaces, bolo ties,
or long hair around rotating machinery.

Keep hands away from solenoid linkages, gears, chains, and belts. These
components can pose a severe pinching hazard.

Exercise caution whenever the hood is open, removed, or when making
adjustments. Some components may become hot during use.

DO NOT modify the machine’s wiring except as specified in Brunswick-
supplied publications.

DO NOT use, clean, or store the machine outdoors and/or in wet conditions.

Use only brushes supplied with this machine or those supplied by Brunswick
for use in this machine.

Ensure all of the machine’s doors are closed and latched before placing the
machine in the storage position.

The possibility exists of a slipping hazard on any wet surface which could
come about by operating, moving, or storing the lane machine.

DO NOT modify any safety apparatus, shield, or electrical components
except by a qualified technician for the sole purpose of adjusting and/or
repair testing the machine. In completing this function all safety aspects
must be restored prior to regular operation
!