Phoenix LT4, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 29 / 168

Operation
61-900040-000 Rev. Date:
01/22
3-7
Second Pass
To edit the second pass, select the program to be
changed on the Home screen. In the instance of
Figure 3- 9, Program B has been selected as indicated
by the ">" next to the letter "B."
Select the Edit Second Pass button. The Edit Second
Pass screen is shown in Figure 3- 10. The name of
the program will be displayed along with a "2." Either
of the operations can be turned on or off by selecting
the appropriate icon at the top. Additionally, setting the
oiling/buffing distances to zero will disable the
respective operation. Operations that are turned on will
be colored in green while ones that are not enabled
are grayed out.
NOTES
The cleaning operation is not available for use on the second pass. This would be
counter-productive as it would remove the oil that was applied on the first pass.
In Figure 3- 10 the oiling and buffing operations are enabled. They can be disabled
by selecting the oil or buffing button or by selecting the "-" button until the values are
zero. When the oil operation is selected it will automatically activate the buffing
operation.
Selecting the "+" under the oiling icon will increase the oiling distance while selecting the "-"
will decrease it.
Selecting the "+" under the buffing icon will increase the buffing distance while selecting the
"-" will decrease it.
As mentioned previously, the units displayed under the oiling and buffing icons represent
the distances, in feet, from the foul line that this program would oil and buff respectively.
When the changes are complete, select the Return button, , at the bottom left corner to
return to the Home screen. Pressing Return automatically saves any changes that were
made.
Figure 3- 9
Figure 3- 10