CUTFOX 10
5-2
PHOENIX CONTACT
102786_C00_ia
5.1
Fault Scenario 1
CUTFOX 10 does not work after being switched on
–
Check the mains connection
–
Check the mains fuse
5.1.1
Check the Mains Connection
•
Check whether the mains plug on the mains connection of the CUTFOX 10 and the
earthed plug are connected to the mains socket.
•
Ensure that the power supply at the mains socket is OK.
5.1.2
Check the Mains Fuse
Figure 5-1
Check the mains fuse
•
Switch off the CUTFOX 10 with the mains switch (1) (press 0).
•
Pull out the mains plug (2).
•
Pull out the fuse holder (3).
•
Check the mains fuses (4).
•
Replace the defective mains fuse (see "Spare Parts" on page B-1).
•
Push in the fuse holder.
Ensure that the mains voltage is correct (see the rating plate)!
Risk of injury!
Pull out the mains plug before checking the mains fuses.
The fuse holder must engage.
Содержание CLIPLINE CUTFOX 10
