Phoenix Contact CLIPLINE CUTFOX 10, Руководство пользователя

Страница: 63 / 78

Operating
102786_C00_ia PHOENIX CONTACT
4-7
Engli
s
h
4.4 Adjusting CUTFOX 10 (Adjustment Mode)
In the mode you can:
– Adjust the cable length
– Set the speed, in which the cable is fed.
– Set language and units of measurement (mm or inches)
4.4.1 Adjustment of the Cable Length (Adjustment)
– Press the "mode" button for approx. 5 s. The display shows Adjustment Mode
You could correct the cable length in the first line.
• Enter "1000" for adjustment.
• Press the "mode" button to change to Auto Mode.
• Enter the cable length "1000 mm" with the number keys "0" to "9". When doing so,
move the cursor with the "Enter" button.
• Press the "start" button. The cable is cut.
• Measure the cable length (e. g., 788 mm).
• Change to Adjustment Mode. Press the "mode" button for approx. 5 s.
• Enter measured value for adjustment (e. g., "788") eingeben.
The measuring unit is recalibrated.
4.4.2 Set Cable Feed Manually Operated (Speed Manu)
T
he cable feed can be set in Manual Mode in the line "SPEED MANU".
• Enter the required feed speed with the number key "0" (slow) to "9" (fast).
4.4.3 Set Cable Feed Automatically (Speed Autom)
The cable feed can be set in Auto Mode in the line "SPEED AUTOM".
• Enter the required feed speed with the number key "0" (slow) to "9" (fast).
Adjustment
Mode
ADJUSTMENT: XXXX
SPEED HAND: X
SPEED AUTOM: X
LANGUAGE: X mm
Auto Mode
QUANTITY: XXX GO TO: XXX
LENGTH: XXXXX mm
Adjustment
Mode
ADJUSTMENT: XXXX
SPEED MANU: X
SPEED AUTOM: X
LANGUAGE: X mm