Phoenix Contact 2700290 Скачать руководство пользователя страница 80

Страница: 80 / 154

Smart Managed Compact Switch

PHOENIX CONTACT

8089_en_03

flWorkTraps

OID

1.3.6.1.4.1.4346.11.11.3

flWorkTrapsDelemeter

OID

1.3.6.1.4.1.4346.11.11.3.0

trapPasswdAccess

trapFWHealth

trapFWConf

trapPowerSupply

trapRstpRingFailure

Syntax

Integer (0 ... 24)

Access

Read

Description

Contains the designation of the interface module.

OID

1.3.6.1.4.1.4346.11.11.3.0.1

Description

Sent to the defined trap receivers on each modification or attempted modification of the de-

vice password and contains information about the status of the last modification or at-

tempted modification.

OID

1.3.6.1.4.1.4346.11.11.3.0.2

Description

Sent to the diagnostic display on each firmware-related modification and contains addi-

tional information about the firmware status.

OID

1.3.6.1.4.1.4346.11.11.3.0.3

Description

Sent each time the configuration is saved and informs the management station that the

configuration has been saved successfully.

This trap is sent in the event of configuration modifications (port name, port mode, device

name, IP address, trap receiver address, port mirroring, etc.), which are not yet saved per-

manently. The trap therefore provides a warning that, if not saved permanently, the

changes will be lost on a reset.

The “flWorkNetIfParamAssignment” object must be set to static (1), otherwise

objects cannot be written.

OID

1.3.6.1.4.1.4346.11.11.3.0.4

Description

Sent each time the redundant power supply fails.

OID

1.3.6.1.4.1.4346.11.11.3.0.6

Description

Sent in the event of a link interrupt in the redundant RSTP ring.

Содержание 2700290



























































































































































Результаты поиска

Содержание 2700290

Отзывы:

Phoenix Contact 2700290, Руководство пользователя, Страница: 80 / 154

Результаты поиска

Содержание 2700290

Отзывы: