Phoenix Contact 2700290 Скачать руководство пользователя страница 122

Страница: 122 / 154

Smart Managed Compact Switch

146

PHOENIX CONTACT

8089_en_03

7.4.1.1

Extended multicast filtering

If IGMP snooping is active, multicast data streams for which no membership reports of pos-

sible recipients are registered are also detected. For these multicasts, groups are created

dynamically. These multicasts are forwarded to the querier, i.e., the querier port is entered

in the group.
If the switch itself is the querier, these multicasts are blocked.

7.4.2

“General Multicast Configuration” web page

This web page provides global settings for multicast support. Here, IGMP snooping can be

activated and an aging time specified for IGMP snooping information.

Figure 7-4

“General Multicast Configuration” web page

IGMP snooping

In IGMP snooping, the switch passively listens in on the IGMP messages that are sent over

the network and dynamically creates the appropriate groups. The groups are not saved and

will be lost during every power down or when the snooping function is switched off.

IGMP query

An MMS/MCS with activated query function actively sends queries at the “Query Interval”

and evaluates the received reports. The MMS/MCS only sends IGMP query reports if IGMP

snooping is enabled and only in the management VLAN.

Содержание 2700290



























































































































































Результаты поиска

Содержание 2700290

Отзывы:

Phoenix Contact 2700290, Руководство пользователя, Страница: 122 / 154

Результаты поиска

Содержание 2700290

Отзывы: