Phoenix Contact 2700290 Скачать руководство пользователя страница 49

Страница: 49 / 154

Configuration and diagnostics

8089_en_03

PHOENIX CONTACT

trapPasswd

trapFWHealth

trapFWConf

trapPowerSupply

trapRstpRingFailure

trapManagerConnection

OID

1.3.6.1.4.1.4346.11.11.3.0.1

Description

Sent to the defined trap receivers on each modification or attempted modification of the de-

vice password and contains information about the status of the last modification or at-

tempted modification.

OID

1.3.6.1.4.1.4346.11.11.3.0.2

Description

Sent on each firmware-related modification and contains additional information about the

firmware status.

OID

1.3.6.1.4.1.4346.11.11.3.0.3

Description

Sent each time the configuration is saved and informs the management station that the

configuration has been saved successfully.

This trap is sent in the event of configuration modifications (port name, port mode, device

name, IP address, trap receiver address, port mirroring, etc.), which are not yet saved per-

manently. The trap also provides a warning that, if not saved permanently, the changes will

be lost on a reset.

OID

1.3.6.1.4.1.4346.11.11.3.0.4

Description

Sent each time the redundant power supply fails.

OID

1.3.6.1.4.1.4346.11.11.3.0.6

Description

Sent in the event of a link interrupt in the redundant RSTP ring.

OID

1.3.6.1.4.1.4346.11.11.3.0.99

Description

Trap to test the connection between the SNMP agent and the network management sta-

tion.

Содержание 2700290



























































































































































Результаты поиска

Содержание 2700290

Отзывы:

Phoenix Contact 2700290, Руководство пользователя, Страница: 49 / 154

Результаты поиска

Содержание 2700290

Отзывы: