Phoenix Contact 2700290 Скачать руководство пользователя страница 138

Страница: 138 / 154

Smart Managed Compact Switch

162

PHOENIX CONTACT

8089_en_03

9.5.1

PROFINET stack and PDEV function

The PDEV function is supported by PROFINET stack version 2.2. The following functions

are supported by PN stack 2.2:
–

Link status, port mode, and port MAC address can be requested via the port

–

Storing of PDEV data

–

Reorganization of submodules for integrating interfaces and new ports

–

Use of the PN stack LLDP in PN mode (used for neighbor and topology detection)

–

Support for device replacement and application redundancy

9.5.1.1

PDEV in the firmware

The PDEV function can be used for the FL SWITCH SMN device range in firmware version

2.2 or later. In addition, the corresponding version of the GSDML file must be used (the

FDCML file does not support PDEV at present).
These files are used to describe the device function and can be imported into an engineer-

ing tool.
The PDEV function is only available in firmware version 2.2 or later.

Содержание 2700290



























































































































































Результаты поиска

Содержание 2700290

Отзывы:

Phoenix Contact 2700290, Руководство пользователя, Страница: 138 / 154

Результаты поиска

Содержание 2700290

Отзывы: