Phoenix Contact 2700290 Скачать руководство пользователя страница 3

Страница: 3 / 154

PHOENIX CONTACT

Please observe the following notes

User group of this manual

The use of products described in this manual is oriented exclusively to:

–

Qualified electricians or persons instructed by them, who are familiar with applicable

standards and other regulations regarding electrical engineering and, in particular, the

relevant safety concepts.

–

Qualified application programmers and software engineers, who are familiar with the

safety concepts of automation technology and applicable standards.

Explanation of symbols used and signal words

How to contact us

Internet

Up-to-date information on Phoenix Contact products and our Terms and Conditions can be

found on the Internet at:

phoenixcontact.com

Make sure you always use the latest documentation.

It can be downloaded at:

phoenixcontact.net/products

Subsidiaries

If there are any problems that cannot be solved using the documentation, please contact

your Phoenix Contact subsidiary.

Subsidiary contact information is available at

phoenixcontact.com

Published by

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstraße 8

32825 Blomberg

GERMANY

Should you have any suggestions or recommendations for improvement of the contents and

layout of our manuals, please send your comments to:

[email protected]

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety measures that follow this symbol to avoid possible

injury or death.

There are three different categories of personal injury that are indicated with a

signal word.

DANGER

This indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING

This indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

This indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

This symbol together with the signal word

NOTE

and the accompanying text

alert the reader to a situation which may cause damage or malfunction to the

device, hardware/software, or surrounding property.

This symbol and the accompanying text provide the reader with additional

information or refer to detailed sources of information.

Содержание 2700290



























































































































































Результаты поиска

Содержание 2700290

Отзывы:

Phoenix Contact 2700290, Руководство пользователя, Страница: 3 / 154

Результаты поиска

Содержание 2700290

Отзывы: