Phoenix Contact 2700290, Руководство пользователя, Страница: 129 / 154

Virtual Local Area Network (VLAN)
8089_en_03 PHOENIX CONTACT
153
Figure 8-6 Example: Communication between termination devices via VLAN
Switch configuration
1
Set both switches to “VLAN Tagging” mode, save, and restart the devices.
2 Create VLAN 5 on switch 1 and specify port 7 as an “untagged” member and port 1 as
a “tagged” member.
3 For port 7 at switch 1, set the port VLAN ID to 5 and the port priority to any.
4 On switch 2, set up port 2 and port 3 as “tagged” members of VLAN 5.
Both termination devices now communicate via the network path shown in the example
without other switch ports forwarding the broadcast packets for both termination devices, for
example.
8.6 VLAN and (R)STP
When using (R)STP and VLAN simultaneously, please note the following:
–
(R)STP is not based on VLANs.
– (R)STP creates a loop-free topology in the form of a tree structure.