Phoenix Contact 2700290, Руководство пользователя, Страница: 124 / 154

Smart Managed Compact Switch
148
PHOENIX CONTACT 8089_en_03
8.2.2 Changing the management VLAN ID
8.2.2.1 Configuration in transparent mode
1 In WBM, enable the pages for VLAN configuration (WBM: User Interfaces, Virtual LAN).
2 Create the required VLANs on the “Static VLANs” web page.
3 On the “VLAN Port Configuration Table” web page, assign the ports for incoming pack-
ets to individual VLANs using the VLAN ID.
4 On the “IP Configuration” web page, the desired management VLAN ID can now be set.
5 On the “General VLAN Configuration” web page, set the switch to “Tagging” VLAN
mode.
6 Save the configuration on the “General Configuration, Configuration Management” web
page and restart the switch.
8.3 General VLAN configuration
Basic settings for VLAN operation can be made on the “Switch Station, VLAN, General
VLAN Configuration” web page.
Transparent In “Transparent” mode, the switch processes the incoming data packets as described in
Section “Frame switching” (see Section 3.3 on page 22). Neither the structure nor the con-
tents of the data packets is changed. The information about VLAN assignment from a tag
that may be contained in the data packet is ignored.
Figure 8-1 “General VLAN Configuration” menu
The “IGMP Query” function only transmits in the management VLAN and only stops if
there is a better querier in the management VLAN.
The switch supports a maximum of 32 different VLANs.