— 26 —
A
DVANCED
O
PERATIONS
(C
ONTINUED
)
Using On-Screen Display
You can display the VCR operating
status on the TV screen.
For the information about what you can
see on the TV screen, see page 5.
1
Select MODE SET Screen
1 Press
MENU
.
2 Press
5 or ∞ to select “MODE
SET” then press
OK
or
4
.
The Mode Set menu appears.
2
Set OSD
1 Press
5 or ∞ to select “O.S.D.”
2 Press
OK
or
3.
Each time you press the button, the
setting changes as follows:
ON:
The VCR operating status appears
on screen (The default setting is
“ON”).
OFF:
The VCR operating status does not
appear on screen.
3
Finish Setting
Press
MENU
.
Notes:
• When you use this VCR as the player for
tape duplication, be sure to set “O.S.D.”
to “OFF” before starting.
• During playback, the operation mode
indicators may be disturbed depending on
the type of tape being used.
One Touch Recording (OTR)
The OTR function lets you quickly
specify how long you want a recording
to continue. You do not have to
programme the timer.
Make sure....
• The record tab on the cassette is not
removed.
• Your VCR, TV and antenna are
connected correctly.
1
On TV
1 Turn on the TV.
2 Select the video channel (or video
input).
2
On VCR
Insert a cassette with the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
3
Select Channel
Press
PROG.
(or
PROGRAMME
) +/–
or
Number
buttons to select the
channel to record.
4
Start OTR
Press
RECORD
¶ twice.
Recording starts immediately, and the
(Record) indicator lights up and
blinks on the display.
5
Select Recording Length
Press
RECORD
¶ repeatedly until the
desired recording length appears.
Each time you press the button, the
recording length increases in 30-minute
intervals.
=
0: 30
=
1:00
=
1:30
5:30
=
6:00
REC (Normal recording)
+
+
+
+
+
.....
MODE SET
DSPC
ON
O. S. D.
ON
DIRECT RECORD
ON
AUTO SP
=
LP TIMER
OFF
DIGITAL 3R
ON
POWER SAVE OFF
S-VHS
AUTO
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
To change the recording
length during an OTR
Press
RECORD
until the desired
length appears.
To cancel an OTR
Press
STOP
7 to stop recording before
the preset recording length is reached.
If you want to cancel the OTR mode
but continue recording, press
RECORD
¶ several times until
(Record) indicator stops blinking.
Notes on the indications on the display
while an OTR operation
• During recording, the displayed time
counts down. When “0:00” is reached,
recording stops and the VCR turns off
automatically.
• If an OTR is engaged during pause, the
displayed time counts down normally, but
recording does not begin until you cancel
the pause.
VR1000/07-New
99.7.8, 8:01 PM
26
