— 17 —
If you want to descramble
programmes when receiving
scrambled broadcasts
When you can receive a scrambled
broadcast, you can descramble the
programme by connecting this VCR to
an external decoder through the VCR’s
AV2 IN/DECODER connector.
Complete the connection described on
page 34 and follow the instructions
below;
1 Press
MENU
to access main menu
screen.
2 Press
5 or ∞ to select “MODE
SET”, then press
OK
or
3.
The mode set screen appears.
3 Press
5 or ∞ to select “AV2
SELECT”.
4 Press
OK
or
3 to select “DE-
CODER” then press MENU to exit.
5 Press
MENU
again to access the
main menu.
6 Press
5 or ∞ to select “MANUAL
CH SET”, then press
OK
or
3.
The programmed channel informa-
tion list appears.
7 Press
5 ∞ 23 to select the
channel position broadcasting
scrambled programmes, then press
OK
twice. The Manual Channel Set
screen appears.
8 Press
3 until “OFF” (Decoder
setting) begins blinking, and set it to
“ON” by pressing
5 or ∞.
9 Press
OK
. The programmed channel
information list appears.
10 Press
MENU
.
If you want to perform fine-
tuning
Fine-tuning is performed automatically
during Auto Channel Set, but you can
also perform fine-tuning manually.
1 Press
MENU
.
2 Press
5 or ∞ to select “MANUAL
CH SET”, then press
OK
or
3.
3 Press
5∞ 23 until the item you
want to tune begins blinking. Press
OK
twice. The Manual Channel Set
screen appears.
4 Press
3 until “+/–” begins blinking,
then press
5 or ∞ until the picture is
clearest.
5 Press
OK
. The programmed channel
list appears.
6 Press
MENU
to exit the menu
operations.
If you want to change station
names
You can also change the station name
manually.
1 Press
MENU
.
2 Press to select “MANUAL CH
SET”, then press
OK
or
3.
3 Press
5∞ 23 until the item you
want begins blinking.
4 Press
OK
twice. The Manual
Channel Set screen appears.
5 If you want to change the station
name to registered one (P.18), press
3 until the station name (ID) begins
blinking, then press
5 or ∞ until the
new station name (ID) appears.
If you want to change the station
name to other than registered one,
press
3 until the first letter of the
station name (ID) begins blinking,
then press
5 or ∞ to cycle through
the characters (A–Z, 0–9, –, *, +, _
(space) and stop when the desired
character is indicated, then press
3
to enter. Enter the remaining
characters the same way (maximum
of 4).
• If you make a mistake, press
2
until the incorrect character begins
blinking. Then enter the correct
character by pressing
5 or ∞.
6 Press
OK
. The programmed channel
list appears.
7 Press
MENU
to exit menu opera-
tions.
MODE SET
PREVIOUS PAGE
AV1 SELECT VIDEO
AV2 SELECT AV2
[
5∞
]
=
[MENU] : EXIT
ATTENTION
• If the channel positions are changed
or deleted, the Guide Programme
numbers that have been set are reset
or changed. If an attempt is made at
timer programming with
VIDEO
Plus+ system
in this state, the
“GUIDE PROG SET” screen
appears. Input the channel position on
which the broadcast for the
PlusCode
number is received.
• If the channels are added, set the
Guide Programme number for that
channel (station). (
✈
“VIDEO Plus+
Set Up” on page 20)
VR1000/07-New 99.10.15, 5:41 PM
17
