Philips Strand Lighting, Руководство по эксплуатации

Страница: 68 / 178

Operation Guide
500ML Lighting Control Console
6 6
Programming
Fixture Sub-Selection
Fixture Sub-Selection provides additional fixture selection features based on your current fixture selection set. This
means that all sub-selection functions are applied to your current fixture selection. If you do not have fixtures
selected, the Fixture Sub-Selection will be applied to all fixtures instead. If you select any of the sub-selection
functions, the console will remember the full selection that you made using the keypad and apply all functions to
Fixture Sub-Selection memory.
Most sub-selection functions are easily accessed by using the Selection Toolbar ( Figure 112 ). To open the Selection
Toolbar, click on the first button that reads Fixture Selection from within the Main Toolbar. Clicking on Close will
close the Selection Toolbar. However, some sub selection functions are accessed directly by hard keys on the console
or the keypad.
Figure 112: Main Toolbar to Selection Toolbar
Note: To clear or deselect selected fixtures from Sub Selection, refer to "Deselecting all Fixtures" on page 65 .
Fixtures with Values Selection
This will select all fixtures that have values set in the programmer. It does not take the Sub Selection memory into
account. This is especially useful after loading a cue for editing or to simply select all fixtures in the programmer.
Figure 113: Selection Toolbar - Fixtures with Values
Example:
1) Fixtures 501, 503 and 508 have values in the programmer but are not selected.
2) Hit Fixtures w. Values from within the selection toolbar. 501, 503 and 508 are selected.
All Fixtures Selection
If no Sub Selection has previously been made, this will select all fixtures contained in the showfile.
If you previously selected some fixtures and altered that selection using any of the available sub selection modes (like
Even Odd, Half, etc) this will bring you back to your complete selection set.
Figure 114: Selection Toolbar - Fixtures with Values
Example:
Step 1. Select Fixture 501 thru 510. This selection is now "memorized" until you clear the selection.
Main Toolbar
Selection Toolbar
Selection Toolbar
Selection Toolbar