manualshive.com logo in svg

Philips Strand Lighting, Руководство по эксплуатации, Страница: 126 / 178

Поделиться
Скачать
Philips Strand Lighting Скачать руководство пользователя страница 126

Operation Guide

500ML Lighting Control Console

1 2 4

Programming

To switch off a cuelist, select it from the List and press the Off Selected button.

Figure 226:  Off Menu Window

9. Working with Masters

Master Basics

Masters work like remote controls - you may assign different objects to masters and configure them independently in
terms of button and fader configuration. These assignments are stored for each master and are not linked to the object
the master is connected to. That means you may assign the same single cuelist to multiple masters and configure each
master differently.

Assigning a Grandmaster

The Grandmaster provides an overall inhibitive fader for all fixture Intensities.

To assign a fader to act as the Grandmaster, press the [ASSIGN] key, followed by the [GO], or [PAUSE/BACK] key
of the fader that should act as the Grandmaster. The Assign Master Fader window (

Figure 227

) will open, asking you

what to assign to this master. Select Grandmaster.

Figure 227:  Assign Master Fader Window - Grandmaster

Assigning Fixtures to Masters (Creating an Inhibitive Master)

Fixture Dimmer Masters are compared HTP, so the highest master will take precedence.

 

 

Содержание Strand Lighting



















































































































































































Отзывы:

Нет отзывов