Philips SignageSolutions 49BDL5055P, Руководство пользователя

Страница: 55 / 76

49BDL5055P
41
2. After select update.zip file, PD will restart and start to update.
3. If not found update.zip. The dialog is no content and the Ok button
will be gray and useless.
Note:
(1) Only support Android Full image.
(2) File name should be update.zip.
(3) The file should be located in root of storage.
5.15.2. Legal Information
Show the open source licenses.
5.16. Supplementary
5.16.1. Quick Info
You can press “Info + 77” to startup quick info.
Quick info will show “Network” and “Monitor Information”, as below:
Note:
Operation hours : It is updated every minute.
Heat status : It is updated every 5 seconds.
5.16.2. How to custom an Android boot
animation?
1. Overview
The Android boot animation is used script to load PNG files when
the device boots. It is contained within an uncompressed zip file called
Bootanimzation.zip.
2. Inside the Bootanimzation.zip file
The Bootanimzation.zip as follow:
• The image folder (Contains PNG images named in incremental
numbers)
• The desc.txt file
(1) The image folder
These contain PNG images named in numbers, starting from
something like 0000.png or 0001.png and proceeding with
increments of 1. There has to be at least one folder and there is no
known upper limit to the number of folders.
(2) The desc.txt file
This file defines how the images in the folder(s) are displayed during
the boot animation, in the following format:
- Width Height Frame-rate
- mode Loop delay-time Folder1
-
mode Loop delay-time Folder2
An example of a desc.txt file is:
-
1920 1080 30
-
p 1 0 part0
- p 0 0 part1
a. The first line
1920 and 1080 define the width and height of the screen
resolution.
30 is the frame rate in fps (frames per second) i.e. number of
images to display per second.
b. The second and third lines have a same format.
The first ‘p’ defines play mode is immediately stop playing when
boot complete.
The number after ‘p’ defines repeat mode
- specifying 0 would make the part loop indefinitely till the
device has boot complete.
- specifying 1 would make the part playback once.
The next number defines the delay time(ms). For example, if set
10, when all image files has been playback, system will delay 10ms.