ö
Turning on the power and listening to preset radio stations
1
“
AUTO INSTALL- PRESS PLAY
”
will appear on the display.
If not, press and hold
ÉÅ
on the system.
2
Press
ÉÅ
on the system again to start installing all available radio stations.
3
Once completed, the last tuned radio station will play.
Press
1
2
to select a preset radio station.
To tune to a non-preset radio station, press
S
T
briefly and repeatedly.
ö
Playing a disc
1
With the DVD system’s power on,
press
DISC
on the remote control.
2
Turn on the TV power and set to the correct Video In channel or
Audio/Video mode
. The DVD system’s screen saver will show on the TV.
The TV’s Video Input channel may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT 1 or
EXT 2, etc. These channels are often near channel 00. See your TV manual for details.
3
Press
OPEN/CLOSE
on the system and
load a disc
, then press
OPEN/CLOSE
again to close
the disc tray.
4
Playback will start automatically. If not, press
ÉÅ
.
If a disc menu appears, use
3
4
1
2
to make the necessary selection, then press OK. Or, use the numeric keypad on
the remote control to select features. Follow the instructions given on the disc menu.
5
During playback, you are able to change certain operations or features (for example, change the
subtitle language, play in slow motion speed, etc.). Press
SYSTEM MENU
on the remote control, then
use
3
4
1
2
to select your preferred options and press
OK
to confirm. To remove the menu bar,
press
SYSTEM MENU
again.
Please refer to the owner’s manual “Special DVD/VCD features” for more information.
6
To stop playback, press
Ç
.
Region Codes
DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD system.
ö
Playing other equipment connected to your DVD system
1
To use your DVD system’s home cinema surround capabilities,
connect other equipment and select the correct input source
.
Please refer to the owner’s manual “Connecting Additional Equipment” for more information.
2
Turn on and/or press PLAY on the equipment to start playback
.
If necessary, connect the Video Output of the connected equipment (VCR or laser disc player) to
TV for viewing purposes.
Make sure your DVD system
and TV are connected and
turned on!
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Connect ...
VCR /
Laser disc player
CD Recorder
"DIGITAL OUT"
Televeision
LX7000SA /
LX8000SA
"AUDIO OUT"
"AUDIO OUT"
Select input source
from the remote
control
Press to select "
DI
".
Press to select "
AUX
".
Press .
➜
➜
➜
➜
➜
➜
DIGITAL
IN
TV
IN
AUX
IN
AUX/DI
AUX/DI
TV/AV
1
ALL
DISC
OK
SYSTEM
MENU
1 2 3 4
SOUND
VOLUME
SURROUND
SOURCE
OPEN/CLOSE
iR
SENSOR
STANDBY-ON
ECO POWER
DVD VIDEO /SACD DIGITAL SURROUND SYSTEM
DISC 3
POWER ON/OFF
OPEN/CLOSE
Color Systems
Recordings are made according to a color system. The most common color system in the United States is NTSC. This DVD system is NTSC-compatible.
Check your disc or its case to see if it is NTSC or PAL formatted.
If you want to play a PAL disc, change the setting to “AUTO” from the System Setup menu (refer to the owner’s manual). Make sure your TV is compatible with both
NTSC and PAL. The NTSC or PAL setting of the disc, TV and DVD system must match.
Quick Use
Guide
Quick Use
Guide
