26
English
Plug and Play
Plug and Play allows you to store all available radio stations
automatically.
First time setup/power up
1
When you turn on the power, "
AUTO INSTALL
-
PRESS
PLAY
" is displayed.
2
Press
ÉÅ
on the system to start installation.
➜
"
INSTALL TUNER
" is displayed, followed by "
AUTO
PROGRAM
".
➜
The system will automatically store the radio stations
with sufficient signal strength, starting with FM band and
followed by AM band. Weak radio stations may be stored
in later presets.
➜
When all the available radio stations are stored or the
memory for 40 presets is used, the last preset radio station
will be played.
To reinstall the Plug and Play
1
In standby mode
, hold down
ÉÅ
on the system until
"
AUTO INSTALL
-
PRESS PLAY
" is displayed.
2
Press
ÉÅ
again to start installation.
➜
All previously stored radio stations will be replaced.
To exit the Plug and Play
●
Press
Ç
on the system.
➜
If you do not complete the Plug and Play installation, the
function will be restarted when you turn on the power
again.
Notes:
– If no stereo frequency is detected during Plug and Play,
"
CHECK ANTENNA
" will be displayed.
– During Plug and Play, if no button is pressed within 15
seconds, the system will exit Plug and Play mode.
Tuning to radio stations
1
Press
SOURCE
to select TUNER mode (or
TUNER
on
the remote control.
2
Press
TUNER
again to select the desired band : FM or AM.
3
Hold down
S
or
T
until the frequency indication
starts to change, then release.
➜
The system automatically tunes to the next strong signal
radio reception.
●
To tune to a weak station
, press
S
or
T
briefly
and repeatedly until an optimal reception is found.
4
Repeat
step
3
if necessary until you find the desired radio
station.
Presetting radio stations
You can preset up to 40 radio stations in the memory.
Automatic preset from a desired preset
number
1
In tuner mode, press
1
or
2
or use the
numeric keypad
(0-9)
to select the desired preset number.
2
Hold down
PROG
until “
AUTO PROGRAM
” is displayed.
➜
If a radio station has been stored in one of the presets,
it will not be stored again under another preset number.
➜
If no preset number is selected, automatic preset will
begin from preset (1) and all your former presets will be
overridden.
To exit the preset setting
●
Press
PROG
or
Ç
on the system.
Manual preset of favorite radio stations
1
Tune to your desired radio station (refer to “Tuning to radio
stations”).
2
Press
PROG
twice
.
➜
The preset number starts flashing.
3
Press
1
or
2
or use the
numeric keypad (0-9)
on the
remote control to select the desired preset number.
4
Press
PROG
again to store the radio station.
●
Repeat
steps 1–4
to store other radio stations.
5
To exit, press
Ç
.
Notes:
– If you attempt to program more than 40 preset radio
stations, "
PROGRAM FULL
" is displayed.
– During programming, if no key is pressed within 15
seconds, the system will exit the program mode automatically.
Radio Reception
R
ADIO
R
ECEPTION
