Philips eS21, Руководство по установке и эксплуатации

Страница: 22 / 30

Installation & Operation Guide
eS21 LED Raceway
2 0
OPERATION AND PROGRAMMING
LCD Menu Structure (continued)
SYSTEM CONFIG (Sets System Options, user-selectable options)
Sub Menu Options Comments
DMX Hold (hh:mm) (in hours :
minutes)
None / 0:01 / 0:05 / 0:10 / 0:15 / 1:00 /
2:00 / 4:00 / 12:00 / 24:00
Sets the amount of time the eS21
LED Strip will keep and adhere to the
last DMX512 levels
Power-up Preset None / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
Sets what preset the output device go
to when LED strip is initially powered
Power-up Hold
Forever / 0:01 / 0:05 / 0:10 / 0:15 /
1:00 / 2:00 / 4:00 / 12:00 / 24:00
Sets the amount of time the output
devices will go and stay at the preset
level (if set) when the LED strip is
initially powered.
Continued from previous page
SELECT PRESET (Selects Recorded Strip Presets)
Sub Menu Options Comments
Preset 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Selects the recorded preset
EDIT PRESETS
Sub Menu Options Comments
Mod/Port Not Applicable
Displays Module, Port and DMX
Address
Preset 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Selects the preset to be programmed
Level (%) 0 to 100% (in 1% increments)
Selects the preset level of the
dimmers, relays or PL Wash (each
dimmer is individually programmable)
Dimmer Set One / All / Capture All
Allows users to set preset to one or all
dimmers or luminaires (at the same
time) or Capture (snapshot) a look
from DMX
MENU CONFIG
Sub Menu Options Comments
Set Splash Display
Philips
Sets the display to Splash Screen 1
after a power up or time out
Strip DMX
Sets the display to Splash Screen 2
after a power up or time out
Strip ID
Sets the display to Splash Screen 3
after a power up or time out
DMX ADDR
Sets the display to Splash Screen 4
after a power up or time out
Strip ID
Sets User ID. Each "#" can be set
from A to Z, 0 to 9, dash ("-") or
underscore ("_")to establish a five-
digit strip ID.
Backlight On (min) (in minutes
Always (always on) / 0 to 60 minutes
(in 1 minute increments)
Sets the amount of time the Head-
End Processor LCD Display backlight
is on after last button press
Display Contrast 0 to 100% (in 1% increments)
Allows user to set the contrast level of
the LCD Display
Set New Password
Each "#" can be set from 0 to 9
(numeric only) to establish a four-digit
password. For more information, see
"LCD Display Passwords and
Security"
below.
# # # # #
# # # #