7
Pass the wire through the
hole in the upper part of the
door. Align the cylinder key
tailpiece and the square shaft
on the outer unit with the 2
rotary holes on the mortise
and inserted them, so that the
outer unit is tightly attached
to the outside of the door.
Tighten the 4 anchor
screws in the mortise.
You may need to cut the cylinder key
tailpiece according to the door thickness.
Please use suitable lengths of square
shaft, connecting screw and anchor screw.
Arrange the connecting screws
and the cylinder key tailpiece
properly. Place the spring and
square shaft in the handle hole.
3
4
Attach the mounting plate
tightly to the inside of the door
and fix the 2 anchor screws.
5
6
Attention
