8
Insert spring and square shaft
in turn into the inner unit and
arrange the rotary knob tailpiece
properly. Insert the outer unit
wire and the motor wire into
the corresponding sockets on
the inner unit, and then insert
the tailpiece and square shaft
on the inner unit into the two
rotary holes on the mortise to
let the inner unit tightly attach
to the inside of the door.
Tighten the 4 anchor screws.
Install the batteries, and close
the battery cover and the lower
cover of the inner unit. Then
the installation is completed.
Try out the inner and outer
handles, the rotary knob. Try out
the mechanical key. Check if all
parts are properly connected.
7
8
9
10
Please hide the
extra wire in the
door hole.
Attention
