34
Problem
Possible cause
Solution
EN
The steamer does not
produce any steam.
The steamer has not heated up
suficieśtřy.
Let the steamer heat up for approx. 40 seconds
before you use it.
You have not pressed the steam
trigger fully.
Press the steam trigger fully.
The water level in the water tank is
too low.
ReiřřцtheцwaterцtaśkцbeforeцcośtiśueцsteaŚiśg.
The steamer needs to prepare for
irstцuse.
After the steamer has heated up, you need to press
and hold the steam trigger for 20 seconds to start
the steam production.
Water drips from the
steamer head.
The steamer head did not heat up
suficieśtřy.
Let the steamer heat up for approximately 40
seconds before you use it.
You may have pressed the Auto-
cřeaśцbuttośцюGC43їцośřyя.
Avoid pressing the Auto-clean button during
steaming.
The steamer produces a
pumping sound and vibrates.
Water is pumped to the steamer
head to be converted into steam.
This is normal.
The steamer does not
heat up.
There could be a connection
problem.
Check if the mains plug is inserted properly in the
wall socket and if the wall socket is working properly.
There is water coming out
from underneath the base.
TheцcapцofцtheцiřřiśgіцeŚptyiśgцopeś
-
ing has not been closed properly.
CřoseцtheцcapцofцtheцiřřiśgіeŚptyiśgцopeśiśgц
properly.
Nothing happens after I
press the Auto-clean button.
юGC43їцośřyя
There could be a connection
problem.
Check if the mains plug is inserted properly in the
wall socket and if the wall socket is working properly.
You did not hold the Auto-clean
button.
Press and hold the Auto-clean button for 1 sec. to
activate the process. When the process is activated
properřy,цyouцwiřřцseeцtheцAuto-cřeaśцřightцlashiśgцośц
the left side of the button.
Thereцisцiśsuficieśtцwaterцiśsideцtheц
water tank.
Fiřřцtheцwaterцtaśkцfuřřyцwithцwaterцirstцbeforeцyouц
use the Auto-clean function.
Some steam comes out
of the steamer during the
Auto-clean process.
The steamer may produce some
steam at the start of the Auto-clean
process, especially if the steamer
head is still hot from the previous
steaming session.
This is normal.
The steamer may produce some steam
at the end of the Auto-clean process.
This happens because the steamer
evaporates the remaining water to
prevent water from spitting out at the
start of the next steaming session.
This is normal.
Halfway through the Auto-
clean process, the steamer
base vibrates louder.
The water tank is empty.
Fill the water tank fully before you start the Auto-
clean process.
The cover cannot be prop-
erly closed.
The cords are not wound up
properly.
Make sure the steam hose and mains cord are prop-
erly wound around the water tank. First wind up the
mains cord and then the steam hose in the groove
inside the base. Refer to section
.
4239_000_9017_2_Picture Rich_A5_v1.indd 34
17-06-14 09:11
Содержание CompactTouch GC400 Series
