Philips 5813 series, Руководство пользователя

Страница: 19 / 72

7
Channels
7.1
About Channels and Switch
Channels
To watch TV channels
• Press  . The TV tunes to the TV channel
you last watched.
• Press
 (Home) > TV > Channels and
press OK .
• Press  + or  - to switch channels.
• If you know the channel number, type in
the number with the number
keys. Press
OK after you entered the
number to switch channels.
• To switch back to the previously tuned
channel, press
 BACK .
To switch to a channel from a channel list
• While watching a TV channel,
press
 LIST to open the channel lists.
• The channel list can have several pages
with channels. To view the next or previous
page, press
 + or  - .
• To close the channel lists without switching
channels, press
 LIST again.
Channel icons
After an Automatic channel update of the
channel list, newly found channels are
marked with a
 (star).
If you lock a channel, it will be marked with
a
 (lock).
Radio channels
If digital broadcasting is available, digital
radio stations are installed during
installation. Switch to a radio channel just
like you switch to a TV channel.
This TV can receive digital television
standard DVB. TV may not work properly
with some operators of digital television ,
non-compliance with requirements of the
standard in full.
7.2
Install Channel
Antenna and Cable
Digital: Reception Test
 (Home) > Settings > Install
Channels > Antenna/cable
installlation > Digital: reception test
The digital frequency is shown for this
channel. If the reception is poor, you can
reposition your antenna. To check the signal
quality of this frequency again,
select
Search and press OK .
To enter a specific digital frequency yourself,
use the remote control digit keys.
Alternatively, select the frequency, position
the arrows on a number
with
 and  and change the number
with  and  . To check the frequency,
select Search and press OK .
Analogue: Manual Installation
 (Home) > Settings > Install
Channels > Antenna/cable
installlation > Analogue: manual
installation
Analogue TV channels can be manually
installed, channel by channel.
• System
To set up the TV system, select System .
Select your country or the part of the world
where you are now and press
OK .
• Search Channel
To find a channel, select Search
Channel and press OK . You can enter a
frequency yourself to find a channel or let
the TV search for a channel. Press
OK ,
select Search and press OK to search for
a channel automatically. The found channel
is shown on screen and if the reception is
19