Predefined symbol rates
With the
Symbol rate mode
set to
Automatic
, the TV
will use 1 of the predefined symbol rates as used by
most cable providers in your country.
Symbol rate
With the
Symbol rate mode
set to
Manual
, you can
enter the symbol rate value you received from your
cable provider. To enter the value, use the number
keys.
Symbol rate 2
With the
Symbol rate mode
set to
Manual
, you can
enter a second symbol rate value you received from
your cable provider. To enter the value, use the
number keys.
Network frequency mode
If you intend to use the fast
Quick scan
method in
Frequency scan
to search for channels, select
Automatic
. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
, you
can enter the network frequency value received from
your cable provider here. To enter the value, use the
number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster
Quick scan
method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended
Full scan
method. This method will take
more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of
1MHz
. Using the 1MHz steps will take more
time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital
channels, you can skip searching for digital channels.
Select
Off
.
Analogue channels
If you know your cable provider is not offering
analogue channels, you can skip searching for
analogue channels. Select
Off
.
Reception quality
If you receive digital channels, you can check the
quality and signal strength of a channel.
If you have your own antenna, you can reposition the
antenna to try and improve the reception.
To check the reception quality of a digital channel . . .
1
- Tune to the channel.
2
- Press
and select
Setup
and press
OK
.
3
- Select
Channel settings
>
Channel installation
>
Digital : reception test
and press
OK
.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number with
and
and change the number with
and
. To
check the frequency, select
Search
and press
OK
.
If you use DVB-C to receive channels, the
option
Symbol rate mode is
available. For Symbol
rate mode, select
Automatic
, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually . . .
1 -
Professional Mode: Off
Press
and
select
Setup
and press
OK
.
Professional Mode: On
Enter the Professional
Home Menu.
2 -
Select
Channel settings
>
Channel installation
>
Analogue : Manual installation
and press
OK
.
•
System
To set up the TV system, select
System
and press
OK
.
27
