manualshive.com logo in svg

PHILIPS Respironics Trilogy 202, Руководство пользователя

Поделиться
Скачать
PHILIPS Respironics Trilogy 202 Скачать руководство пользователя страница 167

Trilogy 202

 

clinical manual

158

Term/Acronym

Definition

PEEP

Positive End Expiratory Pressure

Pressure Control 
Ventilation (PCV)

Ventilation in which breaths are controlled by operator-defined 
Pressure, Inspiratory Time, and Rise Time.

PS

Pressure Support

Ramp

A feature that may increase patient comfort when therapy is 
started. The ramp feature reduces pressure and then gradually 
increases the pressure to the prescription setting so patients can 
fall asleep more comfortably.

Rise Time

The Rise Time is the time it takes the ventilator to change from 
expiration to inspiration. 

RR

Respiratory Rate (the number of breaths per minute).

SD Card

Secure Digital card; This card records usage and therapy data 
from the device. 

Sigh

A breath that is delivered every 100 mandatory or assisted 
breaths at 150% of the normal volume.

SIMV

Synchronous Intermittent Mandatory Ventilation therapy mode; 
SIMV mode delivers Spontaneous, Assisted, and Mandatory 
breaths with a user-defined inspired tidal volume.  This is a 
Volume Control mode.

Sleep State

A low-power state entered when the ventilator is running on the 
internal or detachable battery and the blower has been off for 
five minutes.  This state preserves battery power.  The device is 
restored by plugging the unit into AC power, inserting an SD card, 
or by pressing the Start/Stop button.

Spontaneous Breath

Breath type in which the breath is patient-triggered. 

Содержание Trilogy 202




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды