[Command Class Meter
，
Meter Report
，
Rate Type = 0x01
，
Meter Type =
0x01
，
Precision = 1
，
Scale = 0x04
，
Size = 2
，
Meter Value(V)]
Example:
Scale = 0x04 (V)
Precision = 1
Size = 2 (2 Bytes of V)
Meter Value 1 = 0x09(V)
Meter Value 2 = 0x01(V)
AC load Voltage = (Meter Value 1*256) +(Meter Value 2)= 230.5 (V)
6-2.4 AC load current (
I
)
When receiving Meter Get Command, it will report Meter Report Command to the
node asked.
Meter Get Command:
[Command Class Meter, Meter Get, Scale =0x05(
I
)]
Meter Report Command:
[Command Class Meter
，
Meter Report
，
Rate Type = 0x01
，
Meter Type
= 0x01
，
Precision = 2
，
Scale = 0x05
，
Size = 2
，
Meter Value(
I
)]
Example:
Scale = 0x05 (
I
)
Precision = 2
Size = 2 (2 Bytes of
I
)
Meter Value 1 = 0x01(
I
)
Meter Value 2 = 0x21(
I
)
AC load current = (Meter Value 1*256) +(Meter Value 2)= 2.89 (A)
6-2.5 load power factor (PF)
When receiving Meter Get Command, it will report Meter Report Command to the
node asked.
Meter Get Command:
[Command Class Meter, Meter Get, Scale =0x06(PF)]
Meter Report Command:
[Command Class Meter
，
Meter Report
，
Rate Type = 0x01
，
Meter Type =
0x01
，
Precision = 2
，
Scale = 0x06
，
Size = 1 Bytes
，
Meter Value(PF)]
Example:
Scale = 0x06 (PF)
Precision = 2
Size = 1 (1 Byte of PF)
Meter Value 1 = 0x63(PF) (It means that the load power factor is 0.99)
6-2.6 Reset Accumulated Power Consumption (KWh)
Whenever re-start counting the accumulated power consumption is needed, you can
use Meter Reset Command to clear it.
Meter Reset Command
：
[Command Class Meter, Meter Reset]
6-3 Alarm Report Command
：
When PAN08 detect Overload, it will send Alarm_Report to Group1, Alarm Type =
0x08, Alarm Level=0xFF. When receive Alarm_Get command with Alarm Type = 0x08
9
