[Command Class Multilevel Switch, Multilevel Switch Set, Value = 0x63 or
0xFF(255)]
control the shutter to the top (0xFF)
[Command Class Multilevel Switch, Multilevel Switch Set, Value = 0x00(0)]
control the shutter to the bottom(0x00)
[Command Class Multilevel Switch, Multilevel Switch Set, Value = 0x01-0x62]
control the shutter to the position between Bottom and Top.
3-2 MULTILEVEL SWITCH GET
:
When PAN08 receive Multilevel Switch Get Command, it will send Multilevel Switch
Report Command to report the position of the shutter. When the report value is 0x00,
that mean the shutter is at the Bottom, if the report value is 0x63 or 0xFF that mean
the shutter is at the top, any other value between 0x01~0x62 imply shutter at the po-
sition between top and bottom.
Switch Multilevel Get Command
:
[Command Class Multilevel Switch, Multilevel Switch Get]
Multilevel Switch Report Command
:
[Command Class Multilevel Switch, Multilevel Switch Report,
Value = 0x00(BOTTOM)]
[Command Class Multilevel Switch, Multilevel Switch Report,
Value = 0x01~0x62(Between BOTTOM and TOP)]
[Command Class Multilevel Switch, Multilevel Switch Report,
Value = 0x63/0xFF(TOP)]
3-3 MULTILEVEL SWITCH START LEVEL CHANGE:
This is the command which user can move the shutter up to the top or down to
the bottom.
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down Value]
3-3.1 Up/Down Bit:
If Up/Down Bit=0x00 Shutter move up
If Up/Down Bit=0x01 Shutter move down
If Up/Down Bit=0x03 no move
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down=0x00] control the shutter to the top (0xFF)
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down=0x01] control the shutter to the bottom (0x00)
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down=0x03] Don't move the shutter or stop the moving shutter
ATT. 1. Ignore_Start_Level
、
Start_Level
、
Dimming_Duration
、
Inc/Dec
、
Step_size can
not be used.
6