Phcbi MDF-DU300H, Руководство по эксплуатации

Страница: 41 / 48

39
TEMPERATURE RECORDER (OPTION)
Replacing the dry cell
1. Open the cover and let down the penholder lever. With
this operation, the pen point is apart from the recording
paper.
2. Pull the cartridge out of the mounted position as shown
in Fig. 1 and Fig. 2.
3. Open the case cover of dry cell at the left bottom [Fig. 3].
 The case cover is fixed by a stopper on the right. Pull
the stopper outward to open the case cover.
4.
Remove a dry cell and set a new dry cell in the case
with its minus pole positioned backward.
5. Close the case cover.
6. To replace the cartridge to the recorder, insert it
horizontally first with the slot of the cartridge on the
projection on the recorder and then set up the cartridge
vertically.
7.
Lift up the penholder lever and close the cover.
Note :
This temperature recorder is designed for the manganese
dry cell and the alkaline dry cell.
Do not use a rechargeable battery because the initial
voltage of such battery is low. The rechargeable battery
may cause the malfunction of recorder or shorten the
battery life significantly.
Fig. 3
Cartridge
Case cover
Fig. 2
Fig. 1