Phcbi MDF-DU300H, Руководство по эксплуатации

Страница: 37 / 48

35
TEMPERATURE RECORDER
(OPTION)
Loading the pen cartridge
1. Turn off the power switch.
2.
Slightly raise the end of the pen lifter and remove from
the pen lifter stopper. Then rotate clockwise (until the pen
top is on the pen lifter) as shown in Fig. 1
 This helps to prevent the recording chart from becoming
marked when it is removed or when loading a pen
cartridge.
3.
Remove the pen cartridge from the bag and remove its
cap.
 The cap can be conveniently kept on the cap holder
located at the upper left corner.
4.
As shown in <1> in Fig. 2, press the both sides of the
pen arm as indicated by the arrows to open the head
clamp at A and B.
5.
As shown in <2> in Fig. 2, position the pen cartridge so
that the guide pins fit into the guide holes on the pen arm.
6.
As shown in <3> in Fig. 2, press the two sides of the
head clamp by the arrows (at A and B) to secure the pen
cartridge.
From the side view, the cartridge should hit perfectly on the
pen arm. Confirm the pen arm is attached to both sides
of the pen cartridge.
7.
Return the pen lifter to the original position and secure
with the pen lifter stopper.
8.
Turn on the power switch.
<Important>
Remove the pen cartridge from the pen arm and cover with
the cap to avoid the ink evaporation when the recording is
stopped for a while.
Fig. 1
Pen lifter
Fig. 2
A
B
Pen cartridge
<1>
<2>
<3>
B
A
Pen cartridge
Pen arm