Phcbi MDF-DU300H, Руководство по эксплуатации

Страница: 15 / 48

13
INSTALLATION
1. After unpackaging
Remove all transportation packaging materials and tapes. Open the doors and ventilate the unit. If the
outside panels are dirty, clean them with a diluted neutral dishwashing detergent.
 Undiluted detergent can damage the plastic components. For the dilution, refer to the instruction of
the detergent.
 After the cleaning with the diluted detergent, always wipe it off with a wet cloth. Then wipe off the
panels with a dry cloth.
Note:
Remove the cable tie banding the power supply cord. Prolonged banding may cause the corrosion of
the cord coating.
2.
Installing the unit
Stretch the leveling feet by rotating them to contact them to
the floor. Ensure the unit is installed horizontally. [Fig. 1]
 The unit is installed firmly by separating the casters from
the floor. The unit may be moved at the time of opening/
closing the door if the casters contact with floor.
3. Fixing the unit
Fix the unit to the wall by using 2 fixtures [Fig. 2] and a
rope or chain.
Note:
Contact our sales representative or agent if the unit should
be fixed for earthquake resistant.
4. Ground (earth) the unit
The ground (earth) is for preventing the electric shock in
the case of the electrical insulation is somehow degraded.
Always ground the unit at the time of installation.
 A 3-prong plug with grounding pole is provided to the
power supply cord. There is no need for electric work for
grounding.
 If the power supply outlet is not grounded, it will be
necessary to install a ground by qualified engineers.
WARNING
Use a power supply outlet with ground (earth) to prevent electric shock. If the power supply outlet is
not grounded, it is necessary to install a ground by qualified engineers.
Never ground the unit through a gas pipe, water main, telephone line or lightning rod. Such
grounding may cause electric shock in the case of an incomplete circuit.
Leveling feet
Fig. 1
Fixture
Fig. 2