Phcbi MDF-DU300H, Руководство по эксплуатации

Страница: 40 / 48

38
TEMPERATURE RECORDER (OPTION)
Loading the recording paper
1. Open the cover and let down the penholder lever. With
this operation, the pen point is apart from the recording
paper.
2.
Pull the cartridge out of the mounted position as shown
in Fig. 1 and Fig. 2.
3.
Set a new recording paper in place on the rear bottom of
the cartridge. Set the hole on the recording paper in the
cog of the recording paper driving assembly and feed the
recording paper in the direction of the arrow by driving the
cog wheel as shown in Fig. 3.
4.
Adjust the recording paper properly according to the
marking of date and time.
5.
To replace the cartridge to the recorder, insert it
horizontally first with the slot of the cartridge on the
projection on the recorder and then set up the cartridge
vertically.
6.
Lift up the penholder lever and close the cover.
7. Check that the pen tip contacts with the recording paper
properly.
Fig. 3
Cartridge
Cog wheel
Fig. 2
Fig. 1