10
FREEZER COMPONENTS
1.
Outer door:
To open the outer door, grip the outer door latch. When closing, lock the outer door
latch completely.
2. Inner door:
The operation of the inner door should be quick to minimize the temperature rise in
chamber. Lock the inner door latch completely when the outer door is closed. The inner door is
removable for cleaning or defrosting. See page 25 for details.
3. Outer door latch:
Always lock the outer door latch when the outer door is closed. A pad lock can
be attached to the outer door latch.
4. Inner door latch:
Always lock the inner door latch when the inner door is closed.
5. Magnetic door gasket:
This provides a tight door seal and prevents cold air leak. Keep clean.
6. Access port (rear and bottom):
This is used for leading a cable and sensor of a measuring
equipment, or nozzle of backup cooling kit to chamber.
Replace insulation and the rubber caps when the access port is not used. Improper replacement may
cause rise of chamber temperature or condensation around the access port.
7. Air intake vent (grille):
Do not block this vent to keep the proper cooling performance.
8. Leveling feet:
These are screw bolts used to install and fix the unit. Adjust the height of the leveling
feet by turning the screw bolts until 2 front casters are away from the floor
9. Caster:
4 casters are provided to facilitate moving of the cabinet. For the installation, adjust the
leveling feet so that the front 2 casters cannot contact with the floor.
10. Condenser filter (behind the grille):
This filter prevents the dust from accumulating on the
condenser. The dusty condenser filter may cause failure of refrigerating device. Clean the condenser
filter once a month. See page 24 for details.
11. Space for temperature recorder:
A temperature recorder (optional component) can be attached
here. See page 33 for details.
12. Control panel:
Used for temperature setting, and indication of operating status is displayed on the
digital temperature indicator. See page 11 for details.
13. Keyhole:
Turn counterclockwise to 180
o
with a key and the outer door is securely locked.
14. Fixture (on back side):
2 fixtures serve as spacers between the cabinet and wall and also serve as
hooks to fix the unit. See page 13 for details.
15. Power switch:
This is for turning ON/OFF the power to the unit. ON – “I” OFF – “
○
”
16.
Remote alarm terminal:
This is used to notice an alarm condition of the unit to remote location.
Refer to page 21 for details.
17. Battery switch:
This is a switch for a battery for power failure alarm. Normally, turn on this switch.
Be sure to turn off this switch if the freezer is not in operation for a long period.
Содержание MDF-DU300H
Страница 2: ......
Страница 11: ...9 FREEZER COMPONENTS Freezer unit 14 Rear side 17 10 Inside 1 2 8 9 3 4 5 11 12 14 6 6 7 13 POWER 16 15...
Страница 47: ......
