Phantom MIRO LAB, Руководство пользователя

Страница: 46 / 106

40
Phantom Miro LAB / LC / R Series Camera Manual
From the ‘Main’ screen tap the ‘Menu’ icon as indicated to
bring up the main ‘capture and setting control interface’.
Scroll up and down for desired setting, then tap once to
select parameter to change.
Defines the ‘Speed’ (Frame Rate / Sample Rate) that the
camera will capture at. The available speeds will change
according to the ‘Resolution’ selected. Smaller resolutions
allow higher speeds.
Defines the amount of time the sensor is exposed to light
(in μs of exposure time and degrees of shutter angle).
A smaller exposure time (shutter angle) reduces the
chance of motion blur.
Resolution is the number of pixels used to capture an
image. For example, Miro M120, if 1920 x 1200
(width x height) is set, the full sensor space is available.
Smaller resolutions allow higher recording speeds.
Defines the number of frames past the trigger point to be
stored in the camera’s internal memory (RAM / circular
buffer).
Adjusts the overall exposure of the image based on the
light level measured within a user defined area of interest.
The default is a 50% average exposure. As the lighting
changes, the camera automatically adjusts the shutter
speed to maintain a constant light level in the defined
area.
Setting Access
Speed
Exp. Time
Resolution
Post Trigger
Auto Exposure
The Resolution parameter should be defined
before setting the Speed.
The image aspect ratio will be displayed with
the defined ‘Resolution’ setting.
This feature should not be enabled while per-
forming a CSR, (Current Session Reference).
Once enabled EDR (Extreme Dynamic Range)
will be disabled.