NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
42
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 3-2-1
3-2 Temporary errors and Alarm detection algorithm
3-2-1. Temporary errors
Temporary errors occur during scanning operation and can be remedied by the operator. The temporary errors are displayed
on the monitor of PC screen by the driver, or displayed on the operator panel of the scanner. The display and detection
algorithm of the temporary errors are described below.
(1) Temporary error display sequence
When a temporary error occurs, the scanner displays it by the following sequence.
Function
No. Display
Power LED
Description
ON
Displays “U” and the error No. (0~9) alternately.
Example)
When error “U0” occurs, the scanner displays the
following:
“U”
“0” ………
When Scan or Send to button is pressed while the alarm is displayed, the scanner returns to the “Ready” display (Function
number display).
(2) Temporary errors and detection algorithm
Error display
No.
Scanner display TWAIN display
Detection algorithm and action to recover
1 U1
“Paper jam
detected”
Paper jam
This error is detected when one of the followings occurs:
1)
A document does not reach the TOP sensor while the scanner has
transported the document about 250 mm to pick. (The scanner
performs retry operation.)
2)
The trailing edge of a document does not reach the TOP sensor after
the scanner transports the document by the length (L) below. (The
document may have slipped on the rollers)
Scan condition
Transported length (L) before jam
ADF fixed size scanning
Approximately 450 mm
Long paper scanning
1.2 times of the specified value
How to recover:
Remove the jammed document and close the ADF. When the error
frequently occurs, refer to
Section 3-3-10
.