Pfeiffer Vacuum TM 700 DN, Руководство по эксплуатации

Страница: 7 / 44

7
Product description
3.3 Function
3.4 General connection description
Fig. 1: DeviceNet panel for the TM 700 DN
a Mains connection "
DC in
"
b Connection "
accessory A+B
"
c Connection "
remote
"
d Service connection "
PV.can
"
g Connection "
DeviceNet
"
g1 DeviceNet status LED
g2 Device status LED
g3 DeviceNet baudrate switch
g4 DeviceNet address selection switch MSD
g5 DeviceNet address selection switch LSD
accessory
A
B
PV.can
remote
DeviceNet
DC in
RATE
NET MOD
P
1 2
5
MSD
P
LSD
0 0
2 2
4 4
6 6
8
ADDRESS
b
d b
c
g2
g4 g5 g3
g g1 a
DC in
1
Casing plug with bayonet locking for the voltage supply between Pfeiffer Vacuum
mains packs and the electronic drive unit TC.
1. "DC in" and "accessory" are already described in the operating instructions of the tur-
bopump.
Accessory
M12 socket with screw coupling for the connection of Pfeiffer Vacuum accessories.
The use of a Y-connector enables double assignment of one connection.
PV.can
2
M12 casing socket with screw coupling and LED for Pfeiffer Vacuum Service pur-
poses.
2. The connection "PV.can" serves to service purposes exclusively.
remote
High Density D-sub 26 pole female socket for the connection of a remote control.
DeviceNet
M12 plug (sealed micro) with screw coupling and LEDs for the connection of a De-
viceNet bus system.
Casing socket on the rear side of the electronic drive unit for the connection to the
turbopump.