Pfeiffer Vacuum Pascal 2033 C1, Руководство по эксплуатации

Страница: 45 / 71

EN – 44
Tools and consumable products
Special precautions
Major kit
Spare parts
This kit contains all the seals on the pump
which must be replaced at each complete
disassembly. It includes the flat gasket for
oil casing (on former pumps) but also the
o-ring for the new models.
Keep this kit in a dry place, away from
heat and light (sunlight and ultraviolet
light), in order to prevent any hardening
of the elastomers (see AFNOR standards:
“storage conditions for vulcanized
elastomer based products” - FD T.46 022).
Read the safety instructions at the beginning of the maintenance chapter.
Before disassembling the pump, drain it (
see page 42 ).
All the seals and faulty parts should be replaced: provide a seal kit or a
maintenance kit.
Minor kit
For fasted service, specify the following when ordering:
- Pump type.
- Serial number (on pump label).
- Part number (see list at end of manual).
Maintenance kits containing the most frequently used parts are always available at our
sales outlets. Be sure to use these kits so you will have all the parts necessary.
Screw kit This kit contains all screws and washers for
the pump.
Pump models P/N
2033 SD 054285
2063 SD 054485
2033 C1 054286
2063 C1 054488
2033 C2 065123
2063 C2 065552
Pump models P/N
2033 SD 054288
2063 SD 054487
2033 C1 054289
2063 C1 054489
2033 C2 065124
2063 C2 065553
Pump models P/N
2033 / 2063 SD 105347
2033 / 2063 C1 - C2 105348
In addition to the seal kit, this kit
contains a set of spare parts to perform
maintenance operations on the pump for
a two year period, under normal operating
conditions.