Pfeiffer Vacuum HICUBE ECO, Руководство по эксплуатации

Страница: 23 / 56

Connection using a clamping ring
1. Only use the approved fastening sets from Pfeiffer Vacuum for the connection.
2. Fasten the high vacuum connection on the turbopump and the clamping ring to the counter flange.
3. Use all prescribed components for the turbopump.
4. Tighten the clamping ring screws evenly.
– Tightening torque:
3.7 Nm .
5.3.5 Installation of ISO­K flange onto ISO­K
Mounting of ISO­flanges
If the rotor suddenly blocks the connection of high vacuum flanges of types ISO-KF
or ISO-K can lead to twisting despite proper installation.
● The tightness of the high vacuum connection is not at risk thereby.
Creating the ISO­K connection using bracket screws
1. Only use the approved fastening sets from Pfeiffer Vacuum for the connection.
2. Connect the flange according to the diagram using the components in the mounting kit.
3. Use all prescribed components for the turbopump.
4. Tighten the bracket screws in 3 stages in opposite pairs.
– Tightening torque: 5, 15, 25 ± 2 Nm
5.3.6 Installation of ISO­K flange onto ISO­F
The connection types for the installation of ISO-K with ISO-F flange are:
● "Claw and threaded hole"
● "Hexagonal screw and threaded hole"
● "Stud screw and threaded hole"
● "Stud screw and through-bore"
Mounting of ISO­flanges
If the rotor suddenly blocks the connection of high vacuum flanges of types ISO-KF
or ISO-K can lead to twisting despite proper installation.
● The tightness of the high vacuum connection is not at risk thereby.
Installation
23/56