Pfeiffer Vacuum HiCube 300 Classic Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 30

Pfeiffer Vacuum HiCube 300 Classic Скачать руководство пользователя страница 19

19

Maintenance / replacement

7 Maintenance / replacement

7.1 Maintenance intervals and responsibilities

• Clean the pumping station externally with a lint-free cloth and little industrial al-

cohol.

• Carry out the required maintenance on the components of the pumping station

in accordance with the instructions in the individual operating manuals.

• Clarify shorter change intervals for extreme loads or impure processes with

Pfeiffer Vacuum Service.

• For all other cleaning, maintenance or repair work, please contact your Pfeiffer

Vacuum service location.

WARNING

Contamination of parts and operating fluid by pumped media is possible.

Poisoning hazard through contact with materials that damage health.

Î

In the case of contamination, carry out appropriate safety precautions in order to pre-
vent danger to health through dangerous substances.

Î

Decontaminate affected parts before carrying out maintenance work.

NOTE

Disclaimer of liability

Pfeiffer Vacuum accepts no liability for personal injury or material damage, losses or
operating malfunctions due to improperly performed maintenance. The liability and
warranty entitlement expires.

WARNING

Risk of electric shock

The pumping station is only free of voltages when the mains plug has been disconnec-

ted.

Î

Switch off the master switch and disconnect the mains plug before all work.

«
...
17
18
19
20
21
...
»

Содержание HiCube 300 Classic































Отзывы:

Нет отзывов