13
Installation
Connecting a measu-
ring device
The connection of a measuring gauge (e.g. Pfeiffer Vacuum ActiveLine) is possible
to the display and control unit DCU.
Î
Lift the carrying handle.
Î
Loosen two retaining screws each from a side panel.
Î
Remove the side panel:
– Lift the side panel approx. 2-3 cm from its adjustment and tilt it outwards.
– Disconnect the earthing cable from the terminal socket of the side panel.
– Remove the side panel from the pumping station.
Î
Unscrew the retral perforated plate from the casing of the pumping station (6x
Allen head screw 59).
Î
Run the measuring cable via the measuring connection into the interior of the
pumping station.
Î
Plug the measuring cable in the connection X3 of the DCU.
Î
Settings are possible with the extended parameter set at the DCU.
Fig. 6: HiCube Classic, Running a measuring cable
29
Perforated plate
59
Allen head screw
78
Side panel
127 Display and control unit
127.1 Measuring gauge
127.4 Measuring cable
M
5
9
(6x)
127.1
127.4
127
78
2
9
