Datei/ file name:085501929k de-en-fr-it.docx
page 19 / 66
Drwg-no.: 30007-008-12k
2. Intended use
With a danger and risk analysis, dangers created in the installation can be ascertained. If a dangerous situation is to
be avoided, then the sounders can be used as an integral part of a technical safety system (Safety Instrument System
- SIS) up to safety integration level 2 (SIL 2).
Because of the very different integration of the sounders in various safety architectures, they must be viewed differ-
ently. The following uses are described in the safety manual:
•
Use as a starting alarm of machines or similar applications (see section
•
Use as a warning system without automatic test function via a superior control (see section
•
Use as a warning system with automatic test function via a superior control (see section
In general, the operational safety of the device and the therefore connected system is only guaranteed during in-
tended use in accordance with the specifications of the operating manual. Custom-designed dangers could result from
inappropriate or unintended use of this device.
3. Technical data
3.1. Installation drawing
Fig. 3
3.2. Electrical data
DS10
DS5
Nom. voltage
24 V DC
24 V DC
Voltage range
19 V .. 29 V
19 V .. 29 V
Current consumption
0,42 A
0,28A
Current consumption monitoring circuit
20mA
Control current option TAS
<5mA (24V-)
Capacity of failure contact
Solid state relay
max. 230V~/80mA
R
DSON
<35
Ω
Duty cycle
100 %
Life time
A replacement of the device is recommended after 20 years or
2500 operating hours.
143
133.5
150
Blanking plug M20
Fixing bolt e.g. 2x M6x20
M20x1,5
Ø7
