Pfaff 8304-040, Инструкция по эксплуатации, Страница: 17 / 52

7 - 3
Controls
7
.05
Status display of temperature control
●
Depending on the status of the
temperature control, diodes 1 - 6 light up.
Diode 1 lights up when the actual
temperature deviates from the
required temperature by +/-50°C.
Diode 2 lights up, if the temperature
exceeds 650°C, or if the sensor
breaks.
Diode 3 - no function
Diode 4 - no function
Diode 5 lights up as soon as the heating is
switched on.
Diode 6 lights up when the machine is
heated.
Fig. 7 - 05
1
3
2
4
5
6
7
.06
Regulator for drive roller start delay
●
On regulator 1 the time can be set, when
the drive roller is activated after the hot-
air nozzle has been swung into position.
Fig. 7 - 06
1
From
the
library
of:
Diamond
Needle
Corp