Pfaff 3586-22/02, Инструкция по эксплуатации, Страница: 50 / 158

Sewing
50
Target state
Sewing foot up
10
.05
Error messages
General
The display will show an error code if a fault occurs. An error message is generated by
incorrect handling, faults on the machine or by overload conditions. (For an explanation of the
error codes, see chapter 14.02 Explanation of the error messages .)
Error when switching outputs
If an error occurs when switching an output, the relevant output is displayed with the
desired switching state ( 0) or ( I ).
( 0) means that the output should be switched off and ( I ) means that the output should be
switched on.
The cause of the error is displayed on the next line.
The target state is shown in brackets to achieve an error-free process.
The output Y5 should be activated in the following example.
Condition: Needle must be in the upper position.

Check the needle position and eliminate the error.

Acknowledge the elimination of the error.
Sewing foot up
Needle position