Pfaff 3586-22/02, Инструкция по эксплуатации, Страница: 33 / 158

Set-up
33

Switch on the machine, see chapter 8 . 03 Switching the machine on/off .

Call up the threading aid function.
The workholder bar moves out of the needle area, the sewing foot is lowered and the
sewing start is disengaged.

Loosen the screw 1 and insert the needle 2 into the needle bar until you feel it stop.

Adjust the needle 2 so that the long needle groove is pointing forwards and tighten the
screw 1 .

Start the sewing process
or

Move the machine to home position.
9 Set-up
Observe and comply with all regulations and instructions in this instruction
manual.
Pay particular attention to all safety regulations!
All set-up work may only be carried out by appropriately instructed personnel.
Disconnect the machine from the electricity mains for all set-up work by
operating the main switch or by removing the mains plug!
9
.01
Inserting the needle
Fig. 9 - 01
1
2
Switch off the machine!
Risk of injury due to accidental
machine start-up!
Only use needles of the system
intended for the machine, see
chapter 3 Technical Data !