Pfaff 3586-22/02, Инструкция по эксплуатации, Страница: 123 / 158

Adjustment
123
Needle penetrates the material
Carriage stops,
Command to start the carriage
is issued
at approx. 90°
Needle lifts out of
the material
Carriage starts
at approx. 270°
Needle in the material
in a constant range of
180°
Needle in t.d.c.
0°
The command to start the carriage is issued when the needle penetrates the material but it
only starts one half-turn later ( 180 °) when the needle lifts out.
The stitch pattern can be infl uenced by the setting under certain circumstances.
13
.12.03
Carriage start
(NIS)
This parameter is used to change the time for the start of the clamp drive motors
(° = needle bar position after t.d.c.).