Pfaff 3568-12/12, Инструкция по эксплуатации, Страница: 43 / 52

43
1
2
1
2
3
3
4
ABB_11.TIF
ABB_23_2.TIF
26 Inserting the workpiece
.1 Cuttings on which the position of the pockets is marked are positioned according to the light
marks sent out by the marking lamp (no standard equipment).
.2 With unmarked cuttings mark the position of the various cuttings on the loading plate.
.3 Insert cutting into folding station and position it.
.4 Position pocket cutting on pocket plate 1 (fig. 1), push it underneath leaf springs 2 until it is in
contact with stops 3 and align its sides with the sides of the pocket plate.
.5 When processing checked or striped fabrics and with the corresponding programming
(see section 22.8) actuate foot switch 4 (fig. 2):
- Pocket plate moves down.
.6 In order to align the pattern of the cutting with the one of the pocket actuate foot switch and
hold it down:
- Pocket plate is lifted.