Pfaff 3568-12/12, Инструкция по эксплуатации, Страница: 18 / 52

18
9 Inserting the needle
Needle system 1955-07-MR5
.1 Press key :
- Operation mode “manual”.
.2 Press key :
- Changeover for sewing on.
- Changeover for feed off.
.3 Press key :
- Jig feed arm is swivelling to folding station.
.4 Disconnect locking lever 1 (fig. 1) and swing safety bar 2 fully towards the machine.
- Key lights up
- Machine is disabled.
.5 Push needle fully in with the long groove facing the folding station.
.6 Swing safety bar 2 (fig. 1) back to original position:
- Key lights up,
- key goes out.
.7 Press key :
- Jig feed arm swivels to the sewing machine.
Press key :
- Changeover for feed on.
- Changeover for sewing off.
10 Winding the bobbin thread
.1 Place the empty bobbin on spindle 3 (fig. 2).
.2 Thread the thread according to fig. 2 and wind it clockwise around the bobbin by a few turns.
.3 Switch on winder; to this end press spindle 3 and cam 4 at the same time (arrows in fig. 2).
.4 The bobbin should be filled whilst sewing.
.5 Regulating the filling amount: shift cam 4 (screw 5).
.6 In case of irregular winding: adjust thread guide 6 and regulate bobbin thread tension.